Using a Serial DSS 2-5
Chapter 2: LCD, SPEAKERPHONE & RELATED FEATURES
MBX IP Station User Guide
Using a Serial DSS
The IP-8012DSS and IP-8048DSS can be connected with the IP-8012 or IP-8024 using the
RS-232 cable. Be sure to verify the serial DSS capacities with the MBX System to ensure
usability (refer to MBX Hardware & Installation Guide). The following graphics show the front
and rear view of each.
NOTE: A Linked Pair slave station cannot use a serial DSS.
To use a Serial DSS:
• Set the Station's Serial DSS Usage Map (Admin PGM120 - Flex2),
• Verify the DSS power is OFF (IP-8048DSS only),
• Power-OFF the phone,
• Connect the serial DSS to the phone,
• Power-ON the phone and the DSS (IP - 8048 DSS only),
• Program the DSS button using Web Admin Programming or PGM 126,
• Edit LSS label from Admin PGM126.
To initialize Serial DSS Database:
• Clear the Station's Serial DSS Usage Map (Admin PGM 120 - Flex 2),
• Admin PGM 120 - Flex 3 to reset the phone.
CONFIDENTIAL MATERIAL - Do Not Distribute
1.0 Review Draft - 7/7/2010
Comments to this Manuals