Vertical Edge 120 Specifications download pdf (Page 133)

- 127 -

DX-120 Installation and Maintenance Manual TROUBLESHOOTING INSTALLATION ISSUES

Using Prime CO Instead of Intercom with Modem or Fax

SOLUTION: ANALOG PRIME LINE—SETTING UP A PRIME LINE FOR A FAX

CONNECTED TO AN ANALOG PORT USING CO LINE 4.

Place Line 4 (803) into CO Group2 (740)

From the Fax Machine

1) Remove the receiver from the hook.

2) Dial 740 (be sure you are accessing line 4).

3) Dial a valid number.

NOTE

You must dial out on that line /(line group) before programming the hot line (dial

800 for line 1, 801 for line 2, 802 for line 3 etc.…).

4) Program a System Speed dial bin with a pause.

• To do this, you can use PCDBA (see below) or program using the phone (see next page).

Use PCDBA to Program the System Speed Dial Bin with a Pause

5) Go to the DX-120 PC-DBA System Resource SPD. No. Programming Tenant 1screen in PCDBA.

6) Choose a system speed dial bin (DIR#s 500-699), and insert a P for pause in its SPD. No. field.

Place Line 4 (803) into CO Group2 (740) from the Fax Machine (continued on next page)

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 145 146

No comments

Vertical Edge 120 Specifications Page 133