Vertical Edge 120 Specifications download pdf (Page 64)

INSTALLING THE DX-120 DX-120 Installation and Maintenance Manual

- 58 -

Installing the COM4(continued)

For KSU2 installation, skip step 12 and proceed to step 13.

12) Reposition the CPM over the installed COM4 and secure using the four brass-color standoffs

previously removed (see page 57

13) Make cable/wiring connections to the 4 CO line ports as required.

CAUTION

The FCC requires that wiring of CO lines into a KSU be separated from

wiring of station apparatus into a KSU. Therefore you must use separate

cables for wiring stations and CO lines.

14) Replace the KSU cover and secure with cover screws.

15) Restore KSU power.

Adding an MDM

You can add one MDM to KSU1. The MDM allows you to remotely access to the DX-120 database programming

and maintenance functions using PC-DBA.

NOTE

The MDM does not provide access to the DX-120 In-Skin Voice Mail/AA.

• At default the MDM directory number is 100.

- To establish a connection to the MDM remotely, call into the system where the MDM is installed from the

remote site using PC-DBA.

- Ask to be transferred to extension 100.

- When you hear the modem tone, initiate any required keystrokes to link the modems.

- Then proceed with usual PC-DBA connection routines.

NOTE:

If you are using In-skin voicemail or AA a manual transfer is not necessary.

- Install the MDM onto designated connectors located on the CPM.

Adding an MDM (continued on next page)

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 145 146

No comments

Vertical Edge 120 Specifications Page 64