Vertical Edge 120 Specifications download pdf (Page 93)

- 87 -

DX-120 Installation and Maintenance Manual CONNECTING TO THE SYSTEM

Establishing a Modem Connection with PC-DBA (continued)

6) Select the appropriate control string

Enter a new control string.

NOTE

• To add a new control string: Enter a new control string, then click Add to List

to save the new information.

• To change an existing control string: Click on the string to be edited, make

the change, then click Modify to save the change.

• To delete an existing control string: Click on the string to be deleted, then

click Delete.

7) Click Connect to initiate the connection using the currently selected modem name and control string.

NOTE:

• If nothing happens, it is likely that the modem is not being addressed by PC-

DBA. Select the COM (serial port) that is connected to the PC modem. Enter

the telephone number at the site location. Then press

Enter.

• If modem connection at this site requires a human to transfer the modem call to

the DX-120 modem (ext 100), you must have a standard telephone connected

to the same circuit as the modem so that you can verbally request the

answering person to transfer the call.

• Once a modem connection has been accomplished, you can perform an F5-

Connect. F5-Connect is required to link PC-DBA to the DX-120 CPM

processor.

• Refer to the HINT under step 6 on page 85 regarding the CTS indicator that

appears once connection has been established.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 145 146

No comments

Vertical Edge 120 Specifications Page 93