Basic Preprogramming 7-3
Chapter 7: Starting the MBX IP System
MBX IP Hardware & Installation Guide
Button Explanation
8024 Button Description
This model of an IP 8024 is a sample for the purpose of showing each button. Detailed
information about specific DKTUs and other keysets is described in the Terminal Connection
and Wiring Method section.
How to Enter Programming Mode
To enter programming mode, perform the following steps:
1. Lift handset or press the [MON] button on the ADMIN station; the ICM dial tone
(optional) will be presented.
2. Press the [TRANS/PGM] button and dial *#; the confirmation tone will be heard.
3. Enter the ADMIN password (if applicable); the station will be in ADMIN programming
mode (confirmation tone is heard).
4. Each program is accessed by pressing the [TRANS/PGM] button; the following will
display:
Enter PGM Number
Comments to this Manuals