Installing the Boards 4-1
Chapter 4: Board Installation
MBX IP Hardware & Installation Guide
Chapter 4
Board Installation
Installing the Boards
Prior to installing the Boards, the following should be considered:
CAUTION: - First, check that electrical Power is turned OFF before installation of board.
- To protect the System from static electricity, do not directly touch the boards; to discharge
static, touch a grounded object, or wear a grounding strap.
To install the Board, perform the following steps:
1. Slide the board along the guide rails and hold the board as shown in the 2nd figure,
carefully insert the Board in the direction of the arrow so that the Board securely
inserts with the connector on the Mother Board.
2. Press the screw to turn it clockwise and affix it securely.
Board Installation
Comments to this Manuals