Vertical IP8024 Installation Guide Page 120

  • Download
  • Add to my manuals
  • Print
  • Page
    / 160
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 119
Basic Preprogramming 7-8
Chapter 7: Starting the MBX IP System
MBX IP Hardware & Installation Guide
Extension Board
To set the Extension Board Slot Number:
1. Press the [Trans/PGM] button.
2. Dial 103 (Program Number).
3. Press the FLEX2 button.
4. Enter the Extension Board Slot Number (01-18, 88 for SIP Phone, 99 for IP Phone).
5. Press the [Hold/Save] button.
VMIB Board
To set the VMIB Board Slot Number:
1. Press the [Trans/PGM] button.
2. Dial 103 (Program Number).
3. Press the FLEX3 button.
4. Enter the VMIB Board Slot Number (00-18) that is being programmed.
5. Press the [Hold/Save] button.
DECT/IP/SIP MAX PORT (PGM 104)
The following items are for programming the DECT/IP/SIP MAX Port.
MAX. Number of DECT Terminals
To program the number of DECT terminals:
1. Press the [Trans/PGM] button.
2. Dial 104 (Program Number).
3. Press the FLEX1 button.
4. Enter the DECT Number (000-192).
5. Press the [Hold/Save] button.
MAX. Number of IP Phones
To program the number of IP Phones:
1. Press the [Trans/PGM] button.
2. Dial 104 (Program Number).
3. Press the FLEX2 button.
4. Enter the number of IP Phones (000-324).
5. Press the [Hold/Save] button.
Release 1.7
April 2012
Page view 119
1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 159 160

Comments to this Manuals

No comments