Basic Preprogramming 7-11
Chapter 7: Starting the MBX IP System
MBX IP Hardware & Installation Guide
Gateway IP Address
To program the Gateway IP Address:
1. Press the [Trans/PGM] button.
2. Dial 107 (Program Number).
3. Enter the appropriate BIN number (19-56).
4. Press the FLEX3 button.
5. Enter the IP Address.
6. Press the [Hold/Save] button.
Gateway Firewall IP Address
To program the Gateway Firewall IP Address:
1. Press the [Trans/PGM] button.
2. Dial 107 (Program Number).
3. Enter the appropriate BIN number (19-56).
4. Press the FLEX4 button.
5. Enter the Firewall IP Address.
6. Press the [Hold/Save] button.
RTP Security
To program RTP Security:
1. Press the [Trans/PGM] button.
2. Dial 107 (Program Number).
3. Enter the appropriate BIN number (19-56).
4. Press the FLEX5 button.
5. Press 1 (ON) or 0 (OFF).
6. Press the [Hold/Save] button.
IP ADDRESS PLAN (PGM 108)
The following items are used for performing pre-programming of the System information.
NOTE: The # key can be used to skip to the next program item.
Comments to this Manuals