Vertical TeleVantage 7.5 Technical Information Page 194

  • Download
  • Add to my manuals
  • Print
  • Page
    / 344
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 193
17-4 INSTALLING TELEVANTAGE
5. In the Custom Setup dialog box, select Tftpd32 TFTP Server, and deselect the other
features. (If you have already installed TeleVantage Web Services, that feature is
detected and pre-selected—you do not need to deselect it.)
You can also do any of the following:
Q Click a component to see a description of it as well as the amount of disk space
required to install it.
Q Click Space to check the available space on each hard drive on the PC.
Q Click Change to change the destination drive or folder where the selected
component will be installed. You can specify a different location for each
component.
Note:
By default, the installation location that you specify here is also used as the root
directory for the Tftpd32 TFTP Server phone configuration files. You can change the
root directory at a later time according to the instructions in “Configuring the Tftpd32
TFTP Server once it has been started” on page 17-6.
Click Next to continue.
6. In the Ready to Install dialog box, click
Install. If you are prompted to restart your PC,
do so.
7. When the installation completes, you can configure the Tftpd32 TFTP Server if
needed. While this is not necessary in most configurations, to do so click
Start >
Programs > Vertical TeleVantage > Tftpd32 TFTP Server
.
Page view 193
1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 343 344

Comments to this Manuals

No comments