Vertical TeleVantage 7.5 Technical Information download pdf (Page 304)

J-28 INSTALLING TELEVANTAGE

VoiceBoard channel settings

Channel-level settings are controlled by the VoiceBoard Line registry keys, which are located

under:

HKLM\SOFTWARE\Artisoft\TeleVantage\Server\VoiceBoard<n1>\Line<n2>

where <n1> is the Dialogic board number and <n2> is the channel number (see “Dialogic device

names” on page J-24 for an explanation of board and channel numbering conventions.)

..\Server\VoiceBoard<n1>\Line<n2>

DXCH_ADSIALERT_AMPL

DWORD value that specifies the volume of the ADSI alert tone, which is the first Caller

ID beep when sending Caller ID with call waiting. The Dialogic default is -13, which

is louder than the TeleVantage setting.

TeleVantage default is

-23.

MinTrunkOnhookTime

DWORD value specifying the minimum on-hook time in milliseconds before the trunk

will be used for another outbound call.

Note: If you are using a dedicated trunk for automatic pages, you should set the value

for that trunk to 1000 milliseconds, otherwise paging calls may fail if they occur too

soon after a previous one.

Default is

3000 milliseconds.

DXCH_D_FLAGS

DWORD value for DTMF detection edge select.

Default is

DXCH_DTINITSET

DWORD value that specifies the DTMF digits on which to initiate play on. You can

OR values of different DTMF digits to form the bit mask. Legal values are as follows:

Value Digit Value Digit

-DM_1 1 -DM_9 9

-DM_2 2 -DM_0 0

-DM_3 3 -DM_S *

-DM_4 4 -DM_P &

-DM_5 5 -DM_A a

-DM_6 6 -DM_B b

-DM_7 7 -DM_C c

-DM_8 8 -DM_D d

Default is 0.

1 2 ... 299 300 301 302 303 304 305 306 307 308 309 ... 343 344

No comments

Vertical TeleVantage 7.5 Technical Information Page 304