Vertical TeleVantage 7.5 Technical Information Page 284

  • Download
  • Add to my manuals
  • Print
  • Page
    / 344
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 283
J-8 INSTALLING TELEVANTAGE
UnknownCallerName
STRING value specifying the name to display in the call log when the actual caller
name is unknown.
Default is
“Unknown”.
UseConferencesForEchoCancellation
DWORD value specifying whether or not TeleVantage uses additional echo
cancellation and gain control to improve the audio quality of forwarded calls on analog
trunks. In particular, this feature can improve audio quality for the D/120-JCT board.
However, the feature uses a conference resource when it connects an analog trunk to
another trunk.
If you have PCI analog trunk boards, you must set the Receive Gain of those boards
appropriately depending on whether the feature is on or off. If the feature is on, set the
Receive Gain to P1. If the feature is off, set the Receive Gain to N1. For instructions on
changing Receive Gain, see Installing Dialogic Telephony Components. Note that if
you have ISA analog trunk boards, you do not need to change Receive Gain.
When set to
0 (the default), the feature is off.
When set to
1, the feature is on.
UseDedicatedVoiceDevices
DWORD value specifying whether or not TeleVantage will allocate dedicated voice
devices when it allocates a voice device. When the Server requires a voice device (for
playing/recording audio, or playing/detecting tones), it attempts to allocate one in the
following order:
Q Allocate a shared voice device.
Q Allocate a dedicated, disconnected voice device (i.e. attached to LSI front end that
is not plugged in.)
Q If UseDedicatedVoiceDevices is enabled, allocate a dedicated, connected voice
device.
Default is
1 (Enabled. Server will attempt to allocate dedicated voice devices if
necessary.) A value of
0 disables this setting.
UserVoxPath
STRING value specifying the path for local user voice prompts. Path string must end
in a backslash.
Default is set during installation.
HKLM\Software\Artisoft\TeleVantage\Server\Settings\
Page view 283
1 2 ... 279 280 281 282 283 284 285 286 287 288 289 ... 343 344

Comments to this Manuals

No comments