Vertical SBX IP 320 Service Manual download pdf (Page 118)

Incoming Call Pickup 108

SBX IP 320 Features & Operation Guide

• The external user can dial alternate digits while the VMIB announcement is being played

or the digits should be entered within the Inter-digit Time (5 sec) after the announcement

is ended.

• If a user presses the # button while CCR is in operation, CCR will return to the first step

of Operation.

• If a user presses the * button while CCR is in operation, CCR will return to the previous

step.

• The call will be dropped directly after the VMIB announcement, if VMIB Drop is

selected at the CCR Table.

• If a call is routed to System Speed Dial, the call will be routed to the applicable Speed

Dial destination. If the CO Call is assigned System Speed Dial, the routing will be the

same as Incoming CO Off-net Call Forward.

• The current CCR announcement (current depth) will be provided again until the DISA

retry count is over when the user does not press any digit, destination is busy, or in error

cases. The CCR announcement retry count is calculated by each CCR announcement

depth.

• Each PGM 228 - CCR table (each VMIB announcement) must have a value. If PGM 228

- CCR table 01 (system announcement 01) isn't assigned any value, the call will be routed

to the DID/DISA destination (PGM 167).

• VMIB prompt usage option is set in PGM 167 - Flex 5.

• If destination is No answer, after DID/DISA no answer timer expires, the call is routed to

the No answer destination directly and does not follow the retry count.

Admin Programming

• Flexible DID Table (PGM 231)

• DID Digit Conversion Table (PGM 146 - FLEX 5/ FLEX 6)

• DISA Retry Counter (PGM 160 - FLEX 4)

• CCR Inter-digit Timer (PGM 180 - FLEX 15)

• Inter-digit Timer (PGM 181 - FLEX 8)

• DID/DISA Destination (PGM 167)

• Custom Call Routing Table (PGM 228)

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 269 270

No comments

Vertical SBX IP 320 Service Manual Page 118