Vertical SBX IP 320 Service Manual download pdf (Page 143)

Internet Protocol (H.450) 133

SBX IP 320 Features & Operation Guide

Admin Programming

• Networking Basic Attributes (PGM 320)

• Networking CO Line Attributes (PGM 322)

• Network Routing Table - Numbering Plan (PGM 324)

Net Call Forward

A Station User can forward Net Calls over the network to any networked Station, Station Group,

or VMIB in the System, by activating feature codes.

There are two kinds of standard net call forward signaling methods in the H.450 protocol

specification: Join and Rerouting. The SBX IP 320 System supports both methods. The main

difference is how the connecting path is controlled among the forwarding, forwarded, and

forwarded-to stations.

Conditions

• To use Net Call Forward, a Networked Station should be activated using ADMIN

programming.

• There are several types of Net Call Forwarding: Unconditional, Busy, Busy/No Answer,

and No Answer.

• To deactivate Call Forward, press the [DND/FWD] button while it is flashing.

• If both the Call Forwarded and Forwarded-to Stations are located in the same System, the

networking path CO line is not needed, that is used for the forward voice path; the

Forwarded Call will be initiated as an intercom call.

• At the Forwarding System, it does not check the status of the Forwarded-to Station that is

in DND, CFW, or Empty, when it sets the Net Call Forward.

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 269 270

No comments

Vertical SBX IP 320 Service Manual Page 143