Vertical SBX IP 320 Service Manual download pdf (Page 120)

Incoming Call Pickup 110

SBX IP 320 Features & Operation Guide

• DID calls to a busy station can be placed on a waiting stage according to admin

programming to KTU and SLT.

Admin Programming

• DID Conversion Type (PGM 143 - FLEX 4)

• DID Digit Conversion Mask (PGM 146 - FLEX 2)

• Automatic Speaker Selection (PGM 111 - FLEX 1)

• DID/DISA Destination (PGM 167)

• DID Call Wait (PGM 114 - FLEX 17)

• DID Restriction (PGM 114 - FLEX 16)

DID Call routing with Incoming CLI

A DID incoming call destination can be assigned by the incoming CLI. If a CLI number is

registered at the Incoming CLI Destination Table, all DID calls with these CLI will be routed to

a registered specific place.

The ICLID Table (Incoming CLI Destination Table) has two fields, one is the CLID field, and

the other is the Destination Index field. The Destination Index field represents an index number

of the DID Conv Table (PGM 231).

If CLI from an external call matches with the CLID field, the call will reference the Destination

Index field, and then look at the registered destination of the index from the DID Conv Table.

Operation

To set the Incoming CLI and Index Tables:

1. Press PGM 237 and choose a table number.

2. Register a CLI number at Button 1

3. Assign an Index Table number at Button 2.

Rerouting destination by Incoming CLI:

1. DID incoming call has own CLI

2. This call will be analyzed with ICLID Table.

3. If CLI of this call matches a registered CLI field, then the system looks up the DID Conv

Table with the saved index.

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 269 270

No comments

Vertical SBX IP 320 Service Manual Page 120