ISDN Service 147
SBX IP 320 Features & Operation Guide
Outgoing CLI Service
When a station of the SBX IP 320 system makes an outgoing CO call, it can send the telephone
number.
Operation
• In the SBX IP 320 system, if the Call Type setting (PGM 143 - FLEX 3) is set to
NATIONAL, the outgoing CLI is generated as a National Number, according to the
ADMIN program setting.
• If the ISDN CLI of STATION (PGM 114 - FLEX 12) is set, this value is used as the end
part of CLI when the outgoing CLI is generated.
• If the MY AREA CODE (PGM 200 - FLEX 9) is set, and this value is used as the first
part of CLI when the outgoing CLI is generated.
• If the entry of CLIP/COLP TABLE (PGM 201) is set, and if the CLIP TABLE INDEX
(PGM 143 - FLEX 2) is set to the front entry number, then it can be used as the middle
part of CLI when the outgoing CLI is generated.
• If the CLI RESTRICTION (PGM 114 - FLEX 14) is set to ON, CLI transmission is
restricted.
Condition
• Though the System power is OFF, the stored CLI messages are not erased.
Admin Programming
• CLIP/COLP Table (PGM 201)
• CLIP Table Index (PGM 143 - FLEX 2)
• Call Type (PGM 143 - FLEX 3)
• ISDN CLI of STATION (PGM 114 - FLEX 12)
• ISDN CLIR (PGM 114 - FLEX 14)
• My Area Code (PGM 200 - FLEX 9)
• My Area Prefix Code (PGM 200 - FLEX 10)
Comments to this Manuals