Vertical SBX IP 320 Service Manual download pdf (Page 82)

Call Handling 72

SBX IP 320 Features & Operation Guide

Station Call Coverage

This feature permits a user (a covering station user) to receive ring and answer calls directed

from a covered station. A Flex button is assigned at the covering station for calls to the covered

station. A station can have multiple Call Coverage buttons, each covering a different station.

Multiple stations can have a Call Coverage button for a covered station.

When a covered station rings, the {CALL COVERAGE} button LED will flash and the

covering station may receive ring (immediate or delayed) for the call. The covering station can

answer the call using the {CALL COVERAGE} button, terminating ring at other stations. Once

answered, the LED of {CALL COVERAGE} buttons for the station at other covering stations

will extinguish.

Operation

To assign Call-Coverage button toa flexible button (program by call coverage station):

1. Press the [TRANS/PGM] button.

2. Press a flexible button to program the Call Coverage button.

3. Press [TRANS/PGM] button and dial 46.

4. Enter Station number to cover.

5. Press the [HOLD/SAVE] button.

To set Call-Coverage Attributes (station program by call coverage originated station):

1. Press the [TRANS/PGM] button.

2. Dial 45.

3. Dial 1 to program call coverage mode.

4. Enter 1 to activate call-coverage (0 to disable).

5. Press [HOLD/SAVE].

To set Call-Coverage Delay Ring Cycle (station program by call coverage originated station):

1. Press the [TRANS/PGM] button.

2. Dial 45.

3. Dial 2 to enter call coverage delay ring cycle.

4. Dial delay ring cycle (0-9).

5. Press [HOLD/SAVE].

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 269 270

No comments

Vertical SBX IP 320 Service Manual Page 82