Vertical SBX IP 320 Service Manual download pdf (Page 75)

Call Handling 65

SBX IP 320 Features & Operation Guide

Mobile Extension

A mobile user is able to use the phone as an extension of the SBX IP 320 system to receive

incoming and make outgoing calls when the mobile phone number is registered to the SBX IP

320 System. Mobile Extension is only for SIP trunks.

Operation

To register a mobile extension number to a DKTU.

1. Press the [TRANS/PGM] button.

2. Dial 33.

3. Dial the mobile phone number that is being registered.

4. Press the [HOLD/SAVE] button.

To activate (deactivate) a mobile extension, use the following procedure:

1. Press the [TRANS/PGM] button.

2. Dial 34.

3. Dial 1 to activate the extension, or 0 to deactivate it.

4. Press the [HOLD/SAVE] button.

To register the mobile extension CLI number to a DKT:

1. Press the [TRANS/PGM] + 35.

2. Dial the mobile CLI number.

3. Press the [HOLD] button.

To use the mobile extension in case of Hunt group member:

1. Press the [TRANS/PGM] + 36.

2. Dial "1" to activate, or "0" to deactivate.

3. Press the [HOLD] button.

Incoming call through DID, ICM or Transferring call:

1. The call to the extension which has the preprogrammed mobile extension is routed to

both an extension and a mobile extension.

2. When an incoming call is answered at an extension or at a mobile extension, the other

will stop ringing.

3. If mobile is answered, the extension goes to Mobile-Ext In Used State [IN USE AT

MOBILE EXT].

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 269 270

No comments

Vertical SBX IP 320 Service Manual Page 75