Vertical SBX IP 320 Service Manual download pdf (Page 77)

Call Handling 67

SBX IP 320 Features & Operation Guide

• If the "Transfer recall" timer expires, a call is not routed to the extension associated with

mobile extension.

• An outgoing call from a mobile extension is restricted by the internal station's COS.

• A mobile extension can receive the Calling Party number or his own extension CLI

number as CLI (according to PGM 143-FLEX7-CLI Transit: ORI / CFW)

• To use the "Transferring call / outgoing call from mobile extension" feature, the CO line

connected with the mobile extension should be set to a DID line.

• When a mobile extension calls his own DID number of the SBX IP 320 system to make a

CO call, the SBX IP 320 system checks the CLI of the mobile extension number. If the

CLI matches the "Mobile Extension Number" or "Mobile CLI" which is registered to his

extension, the system provides CO dial tone and allows him to make a CO outgoing call

through the SBX IP 320 system.

• To assign the {Mobile Extension Activation} button:

[TRANS/PGM] + {FLEX} + [TRANS/PGM] + 34 + [HOLD/SAVE]

• If the extension is a member of a Hunt Group (except Ring Hunt Group), a call is routed

to the mobile extension.

• To use the mobile extension in case of Hunt group member, Hunt call should be

programmed in PGM 236, FLEX 5.

• A mobile extension can transfer a call to another station's mobile extension.

Admin Programming

• Mobile Extension Register (PGM 236)

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 269 270

No comments

Vertical SBX IP 320 Service Manual Page 77