ISDN Service 146
SBX IP 320 Features & Operation Guide
Operation
In the SBX IP 320 system, the various operations about the incoming CLI are provided
according to the ADMIN program setting.
• If the CLIP DISPLAY (PGM 114 - FLEX 1) is set to ON, the incoming CLI is displayed
on the station LCD.
• If the CLI NAME DISPLAY (PGM 114 - FLEX 11) is set to ON, the incoming CLI digit
display can be replaced with the matched station speed dial data name.
• If the CLI print (PGM 200 - FLEX 6) is set to ON, the incoming CLI can be printed to an
RS-232C port.
• If the MY AREA CODE (PGM 200 - FLEX 9) is set, and this value matches the start
digits of the incoming CLI, then the matched digits are removed automatically.
• If the MY AREA PREFIX CODE (PGM 200 - FLEX 10) is set, it can be used in
conjunction with the preceding bullet "MY AREA CODE".
• If the CLI MESSAGE WAIT (PGM 114 - FLEX 4) is set to ON, the unanswered CLI data
will be saved in station memory.
Conditions
• Up to 12 digits will be displayed on DKTU as a CLI number.
• Though the power of system is off, the stored CLI messages are not erased.
• The CLI can be shown at SLT which has a CLI display LCD in the SBX IP 320.
Admin Programming
• CLIP LCD Display (PGM 114 - FLEX 1)
• CLI Name Display (PGM 114 - FLEX 11)
• CLI Message Wait (PGM 114 - FLEX 4)
• CLI Print (PGM 200 - FLEX 3)
• My Area Code (PGM 200 - FLEX 9)
• My Area Prefix Code (PGM 200 - FLEX 10)
Comments to this Manuals