Vertical SBX IP 320 Service Manual download pdf (Page 144)

Internet Protocol (H.450) 134

SBX IP 320 Features & Operation Guide

Admin Programming

• Call Forward Attribute (PGM 111)

• Networking Basic Attributes (PGM 320)

• Networking Supplementary Attributes - Transfer Mode (PGM 321)

• Networking CO Line Attribute (PGM 322)

• Networking Routing Table - Numbering Plan (PGM 324)

Net Call Forward - Unconditional

The Forwarded Station refers to the call originator. The Forwarded Station is rerouted to the

Forwarded-to Station by a Forwarding Station (the Station forwarding the call).

Operation

To activate Net Call Forward:

1. Press the [SPEAKER] button and the [DND/FWD] button.

2. Dial the Net Call Forward code (1), and dial a Station number on another networking

system. The [DND/FWD] button will flash and a confirmation tone will be provided.

3. If there is an incoming call to the net call unconditional Forwarding Station, the call is

immediately routed to a Forwarded-to Station, and the Forwarded-to Station will ring.

4. When the Forwarded-to Station is answered, the Call Forwarded and Forwarded-to

Station will be connected.

Net Call Forward - Busy

It is possible for a User to forward their Station remotely over the Network when it is busy.

Operation

To activate Net Call Forward, busy:

1. Press the [SPEAKER] button and the [DND/FWD] button.

2. Dial Net Call Forward code (2), and dial a Station number on another networking system.

3. The [DND/FWD] button will flash and a confirmation tone sounds.

4. If an incoming call is received at the net call busy Forwarding Station, the call is routed to

the set Forwarded-to Station when the called Station is busy.

5. The Forwarded-to Station will ring, and when answered, the call will be connected.

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 269 270

No comments

Vertical SBX IP 320 Service Manual Page 144