Vertical SBX IP 320 Service Manual download pdf (Page 85)

Call Handling 75

SBX IP 320 Features & Operation Guide

To access Dial by Name:

1. Press the [SPEED] button twice.

2. Dial the desired directory (1-3, refer to values).

1 = Intercom

2 = Station Speed Dial

3 = System Speed Dial

A confirmation tone should be heard. The stored names in the speed bin are displayed in

alphabetical order.

Note: The up and down arrows can be used to locate the desired name.

To search a name by entering a character, use the following procedure:

1. While two names are displayed on the LCD, enter alphanumeric data.

2. The LCD displays 2 names which start with the entered character (the cursor will point to

the first name in the LCD).

3. When entering more alphanumeric data, the LCD will display names that start with the

updated input.

Note: To delete the last letter of input, press the [CALLBK] button. The up and down arrows

also can be used to locate the desired name.

4. When the appropriate name is displayed, move the cursor to point at the name.

5. Press the [HOLD/SAVE] button to make a call.

To search for a name by scrolling:

1. While two names are displayed in the LCD window.

2. Use the up and down arrow keys to locate the desired name.

3. When the appropriate name is displayed, move the cursor so it points directly at the

name.

4. Press the [HOLD/SAVE] button to make a call.

To register the name of an SLT:

1. Lift the handset.

2. Dial 563; a confirmation tone sounds.

3. Dial 74 (Name Register code).

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 269 270

No comments

Vertical SBX IP 320 Service Manual Page 85