Vertical SBX IP 320 Service Manual download pdf (Page 64)

Call Handling 54

SBX IP 320 Features & Operation Guide

Headset

An industry-standard headset can be connected to a Station instead of using the handset. The

Station is programmed for headset operation in place of speakerphone operation.

Operation

To change the Station mode between Speakerphone or Headset:

1. Press the [TRANS/PGM] button.

2. Dial code 75.

3. The Station Answer mode should be displayed on the LCD.

4. Dial code 1 (Speaker mode) or 0 (Headset mode).

To change the Headset Ring mode:

1. Press the [TRANS/PGM] button.

2. Dial code 76.

3. The Station Answer mode should be displayed on the LCD.

4. Dial the applicable code

1 = Speaker ring only

2 = Headset only

3 = Both

Conditions

• The intercom signaling mode (HF/TN/PV - [TRANS/PGM] + 1 + 2) can be set in

Headset and Speaker phone mode.

• In Headset mode, the User can select an incoming ring mode to hear ringing with the

speaker, headset, or both by Admin programming.

• The station will receive paging with the Station speaker.

• To answer an intercom call in Tone mode, the User should press the [SPEAKER] button.

• When an intercom call is received in Privacy mode, the station will be muted

automatically. User should press the [MUTE] button to answer the intercom call.

Admin Programming

• Headset Ring Mode (PGM 111 - FLEX 10)

• Speakerphone/Headset (PGM 111 - FLEX 11)

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 269 270

No comments

Vertical SBX IP 320 Service Manual Page 64