Vertical SBX IP 320 Service Manual download pdf (Page 205)

Rerouting 195

SBX IP 320 Features & Operation Guide

Operation

To transfer to an idle station (unscreened):

1. Press the [TRANS/PGM] button.

2. Intercom dial tone sounds and the previous call is placed on exclusive hold.

3. Dial the station number that will receive the transfer.

4. Replace the handset or go on-hook.

To transfer to an idle station (screened):

1. Press the [TRANS/PGM] button.

2. Intercom dial tone sounds and the previous call is placed on exclusive hold.

3. Dial the station number that will receive the transfer.

4. When the station answers, announce the call being transferred.

5. Replace the handset or go on-hook.

To transfer to a busy station, use the following procedure:

1. Press the [TRANS/PGM] button.

2. The CO Line automatically is placed on exclusive hold and the ICM busy tone sounds.

3. The transferred station will receive a muted transferred CO Line ring.

4. If the call is not answered within the designated Transfer Recall time, the CO Line will be

recalled to at transferring station and the attendant will receive a recall ring if the call

remains unanswered.

To make an unscreened transfer by SLT:

1. Press and release the hook-switch, the intercom dial tone sounds.

2. The CO Line is placed on exclusive hold, and the Transfer Recall timer is activated.

3. Dial the Station number the call will be transferred to.

4. Replace the handset and go on-hook.

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 269 270

No comments

Vertical SBX IP 320 Service Manual Page 205