Vertical SBX IP 320 Service Manual download pdf (Page 139)

Internet Protocol (H.450) 129

SBX IP 320 Features & Operation Guide

• For CO Transit-Out, any code will be available using NET Routing Table (PGM 324). If

there is a conflict between NET Routing Table and System Numbering Plan, the System

Numbering Plan will have the highest priority.

• If the CO Transit-Out code is programmed in the Network Numbering Plan Table, then

the type value of this entry must be set to PSTN (PGM 324).

• If the Networked System isn't connected to the Master System directly, the CO

Transit-Out code can be transmitted through the other networked Systems transparently

by setting the PGM 324.

• At the Master System, the PSTN CO lines must be set (PGM 322).

Admin Programming

• Networking CO Line Type (PGM 322 - FLEX 2)

• Network Routing Table - Numbering Plan (PGM 324)

Do-Not-Disturb (DND)

Net Calls to a Station can be rejected using the DND mode; the Calling Station will hear a busy

tone.

Operation

To activate DND mode:

1. Press the [DND] button at the Station.

2. When a call is received at the Station, the Caller will hear a busy tone; the Station in DND

mode will not receive any notification of the call.

Condition

• When a Station is in DND mode, the [NET DSS] of the DND Station will flash if the BLF

(Busy Lamp Field) manager is activated.

Admin Programming

• DND Attribute (PGM 111)

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 269 270

No comments

Vertical SBX IP 320 Service Manual Page 139