Vertical SBX IP 320 Service Manual download pdf (Page 44)

Call Handling 34

SBX IP 320 Features & Operation Guide

Camp-on

When you call a busy Station, the busy tone sounds. You can give a signal to the busy Station.

The busy Station (off-hook or on speakerphone) is notified of the call waiting by a camp-on tone

and the [HOLD/SAVE] button LED flashes.

An SLT User may notify a busy Station of an outside CO call or internal call waiting (camp-on

tone).

Operation

To activate Camp-on while receiving the Intercom busy tone, use the following procedure:

Dial * or the last digit of the busy station.

-or-

Press the busy DSS flexible button

-or-

Press the flexible button assigned as {Camp-On}.

To answer a Camp-on call while receiving the Intercom busy tone, use the following procedure:

1. Press the [HOLD/SAVE] button; the active CO line is placed on exclusive hold and the

call waiting is connected.

2. Press the [HOLD/SAVE] button, to alternately talk with both parties.

To activate Call Waiting on an SLT while receiving the Intercom busy tone, use the following

procedure:

1. Go Off-hook, then dial * or the last digit of the dialed Station number.

2. When answered, the call should be announced.

-or-

Replace the handset and go on-hook.

To answer the call waiting/camp-on, use the following procedure:

1. When the SLT station is busy, the camp-on tone is heard indicating a camp-on call.

2. Hook-flash and dial 560.

3. The SLT Station should be connected to the camp-on call.

4. Hook-flash and dial 56 again, to connect to the original Station call.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 269 270

No comments

Vertical SBX IP 320 Service Manual Page 44