- 109 -
DX-120 Programming Manual BASIC SYSTEM PROGRAMMING TASKS
Customizing the Numbering Plan via PC-DBA (continued)
2) Click More... to display the Numbering Plan (Part 2) screen:
3) Enter the settings in the fields as described below for each section of this screen.
In the CO Group fields (located in the bottom left area of the screen):
4) Select the number of digits (1 to 4) in the directory number you want to assign to CO line group 1 in the
first Length field.
• The default is 3.
5) Enter the digits (0 to 9999) you want to use for accessing CO line 1 in the first Leading field.
• The default is 9.
• Use the method shown in the steps 1 and 2 to assign the lengths and directory numbers for CO line
groups 2 through 5.
In the remaining areas and fields:
6) Specify the length and any appropriate leading digits for CO line directory, Music Source, Loud Bell,
External Pager, Virtual Number, and Meet Me Conference using the same method as shown in the steps
3 and 5 above.
When you are finished:
7) Click the Update button to store the settings into the database on the local disk.
8) Click the Close button to exit the current screen and return to the PC-DBA main screen.
When you have finished all programming changes:
9) Perform a SEND to copy your new database to the DX-120 switch system memory.
Customizing the Numbering Plan via PC-DBA (continued on next page)
Comments to this Manuals