PROGRAMMING THIRD PARTY VOICE MAIL DX-120 Programming Manual
- 378 -
Set the Voice Mail Dialing Ratio via PC-DBA (continued)
From the Dialing Ratio fields near the center bottom of the screen.
2) Select the information for the fields as described below:
When you are finished:
3) Click the Update button to store the settings into the database on the local disk.
4) Click the Close button to exit the current screen and return to the PC-DBA main screen.
When you have finished all programming changes:
5) Perform a SEND to copy the database changes to the DX-120 switch system memory.
Set the Voice Mail Dialing Ratio (continued on next page)
For this field... Select...
Inter-Digit
The time you want the system to pause between each pulse during
out-dialing.
• Valid options are 60, 90, 120, and 150 milliseconds.
• Default is 60 milliseconds.
Tone Time
The length of time you want the system to play each individual
DTMF tone during out-dialing.
• This time is also used for time between DTMF digits.
• Valid options are 60, 90, 120, and 150 milliseconds.
• Default is 60 milliseconds.
Comments to this Manuals