Vertical Edge 120 Instruction Manual Page 60

  • Download
  • Add to my manuals
  • Print
  • Page
    / 504
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 59
BASIC SYSTEM PROGRAMMING TASKS DX-120 Programming Manual
- 52 -
Setting System Time, Date, and/or Hour Mode (continued)
SET SYSTEM TIME, DATE, AND/OR HOUR MODE VIA THE DET
NOTE
chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen.
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see page 27).
3) Press show to display the DB Item Select screen.
Change the Year
From the DB Item Select screen:
4) Enter 08-14-01 to display the current year (e.g., "YEAR :06").
5) Press chg.
6) Enter 2 digits for the new year setting.
7) Press save.
8) Pressing next to go to the month setting (now go to step 5 under “Change the Month:below).
OR
Press the Volume button (up or down) to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Change the Month:
From the DB Item Select screen (see steps 1 through 3 above):
4) Enter 08-14-02 to display the current month.
5) Press the chg until the month you want is displayed.
6) Press next to go to the month setting (now go to step 5 “Change the Date:” below).
OR
Press the Volume button (up or down) to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Setting System Time, Date, and/or Hour Mode (continued on next page)
Page view 59
1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 503 504

Comments to this Manuals

No comments