- 371 -
DX-120 Programming Manual PROGRAMMING THIRD PARTY VOICE MAIL
Set the Call Handling Digits via the DET (continued)
Programming the VM Table – Prefix Table – ICM/VM:
From the DB Item Select screen (see steps 1 through 3 on page 370):
4) Enter 06-02-0X-02-01 (where X is the Tenant Group: 1~3).
5) Press save to display the ICM/VM screen.
6) Press chg.
7) Enter the prefix numbers you want the system to use when identifying a call as originating at the mailbox
owner’s phone.
8) Press save to store the setting.
9) Press next to continue programming the Prefix Table - Transfer (now to go step 6 in the next section).
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Programming the VM Table – Prefix Table – Transfer:
From the DB Item Select screen (see steps 1 through 3 on page 370):
4) Enter 06-02-0X-02-02 (where X is the Tenant Group: 1~3).
5) Press save to display the Transfer screen.
6) Press chg.
7) Enter the prefix numbers you want the system to use to identify a call as transferred to mailbox.
8) Press save to store the setting.
9) Press next to continue programming the Prefix Table - Busy FWD (now go to step 6 in the next section).
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Set the Call Handling Digits via the DET (continued on next page)
Comments to this Manuals