Vertical Edge 120 Instruction Manual Page 87

  • Download
  • Add to my manuals
  • Print
  • Page
    / 504
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 86
- 79 -
DX-120 Programming Manual BASIC SYSTEM PROGRAMMING TASKS
Assigning External Page ID via the DET (continued)
8) Press show to display the tenant group.
9) Press next to display the first paging group.
10) Press chg to select (and apply) the currently displayed paging group.
11) Press next to display the next paging group.
• Repeat steps 9 and 10 until all paging groups are selected as necessary.
12) Press the Hold button to return to the previous menu level.
OR
Press the Volume button (up or down) to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Specify the Number of Digits for the Extension
You need to specify the number of digits for the extension you will use to access the external pager:
From the DB Item Select screen (follow steps 1 through 3 on page 78)
4) Enter 08-09-11-01.
5) Press save.
6) Press chg to select 1 - 4.
7) Press save.
• The default is 3.
8) Press the Hold button to return to the previous menu level.
OR
Press the Volume button (up or down) to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Program the External Page Directory Number Leading 1, 2 or 3
9) Enter 08-09-11-02.
10) Press save.
11) Press chg.
12) Enter the directory number you want to use to access the external pager, and then press save.
• Valid directory numbers include any available, non-conflicting directory number.
• The default is 777.
13) Press the Hold button to return to the previous menu level.
OR
Press the Volume button (up or down) to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Page view 86
1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 503 504

Comments to this Manuals

No comments