- 307 -
DX-120 Programming Manual BASIC CALL HANDLING PROGRAMMING TASKS
Programming Automated Attendant via the DET (continued)
Programming the DISA Code:
From the DB Item Select screen (see steps 1 through 3 on page 303):
4) Enter 03-46-07.
5) Press save to display the DISA Code screen.
6) Press chg.
7) Enter the new DISA Code digit (see IMPORTANT! note on page 311).
• Use the DISA code to provide a caller access to any system resource (e.g., extensions, CO lines, etc.).
• The code may be any dial pad single-digit from 0-9, *, or #.
• The default is 9.
8) Press save to store the setting.
9) Press next to display the Answer Position screen (now go to step 6 in “Selecting the Answering Position:”
below).
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Selecting the Answering Position:
From the DB Item Select screen (see steps 1 through 3 on page 303):
4) Enter 03-46-08.
5) Press save to display the Answering Position screen.
6) Press show to display the Tenant screen.
• Since answering positions may be assigned as unique destinations per tenant group, the system
requires you to enter the tenant group now.
7) Enter the tenant group (1~3) for which you want to make programming changes.
8) Press show to store the setting.
9) Press next to display the Current Day Mode - Answer Position for the tenant group you specified above
(now go to step 6 in
“Setting the Current Day Mode - Answer Position:” below).
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Programming Automated Attendant via the DET (continued on page)
Comments to this Manuals