Vertical Edge 120 Instruction Manual Page 305

  • Download
  • Add to my manuals
  • Print
  • Page
    / 504
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 304
- 297 -
DX-120 Programming Manual BASIC CALL HANDLING PROGRAMMING TASKS
Specifying CO Line Guard Time via PC-DBA (continued)
In the CO Line Guard field in the first column:
2) Select the CO line guard timing you want to use.
• Valid options are between 1 and 10 seconds, in half-second intervals
(1, 1.5, 2, 2.5, etc.).
• The default is 1 second.
When you are finished:
3) Click the Update button to store the settings into the database on the local disk.
4) Click the Close button to exit the current screen and return to the PC-DBA main screen.
When you have finished all programming changes:
5) Perform a SEND to copy the database changes to the DX-120 switch system memory.
SPECIFYING CO LINE GUARD TIME VIA THE DET
NOTE
chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen.
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see page 27).
3) Press show to display the DB Item Select screen.
4) Enter 03-48.
5) Press save to display the CO Line Guard Time programming screen.
6) Press chg until CO line guard timing you want to use appears.
• Valid options are between 1 and 10 seconds, in half-second intervals
(1, 1.5, 2, 2.5, etc.).
• The default is 1 second.
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Page view 304
1 2 ... 300 301 302 303 304 305 306 307 308 309 310 ... 503 504

Comments to this Manuals

No comments