BASIC EXTENSION PROGRAMMING TASKS DX-120 Programming Manual
- 410 -
Setting Up Intrusion Capabilities via the DET (continued)
Setting the Intrusion Accept Option:
From the DB Item Select screen (see steps 1 through 3 on page 409):
4) Enter 01-XXX-12 to set the intrusion privilege for an extension (where XXX is the extension: 101~204).
5) Press save to display the Intrusion Accept screen.
6) Press chg to select Y or N.
• The default is yes.
7) Press next to select the Intrusion Tone field which allows you to choose whether or not you want the
system to play warning tones when it initiates an intrusion on this extension (now go to step 6 in
“Setting
the Intrusion Tone Option:” below).
HINT
Assign Intrusion Privileges to other extensions (as needed) using the steps above.
8) Press the Hold button to return to the previous menu level.
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Setting the Intrusion Tone Option:
From the DB Item Select screen (see steps 1 through 3 on page 409):
4) Enter 01-XXX-13 to set the intrusion privilege for an extension (where XXX is the extension: 101~204).
5) Press save to display the Intrusion Tone screen.
6) Press chg to select Y or N.
• The default is yes.
HINT
Assign Intrusion Privileges to other extensions (as needed) using the steps above.
7) Press the Hold button to return to the previous menu level.
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Comments to this Manuals