Vertical Edge 120 Instruction Manual Page 67

  • Download
  • Add to my manuals
  • Print
  • Page
    / 504
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 66
- 59 -
DX-120 Programming Manual BASIC SYSTEM PROGRAMMING TASKS
Naming CO Lines via PC-DBA (continued)
2) Highlight the current entry in the CO Line Name field at the bottom or the CO Line names screen.
3) Enter the name you want to assign to the specified line.
4) Click above the entry line to move the newly entered name next to the specified line number.
• Use the steps shown above to assign names to other CO lines as needed.
When you are finished:
5) Click the Update button to store the settings into the database on the local disk.
6) Click the Close button to exit the current screen and return to the PC-DBA main screen.
When you have finished all programming changes:
7) Perform a SEND to copy your new database to the DX-120 switch system memory.
NAMING CO LINES THE DET
NOTE
chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen.
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see page 27).
3) Press show to display the DB Item Select screen.
4) Enter 04-06-XXX (where XXX is the number of the CO line directory you want to name).
• Valid CO line numbers range from 800 to 839.
5) Press save to display the selected CO Line Name/Label field and current name for the line you specified.
6) Press chg to enter a new name/label.
7) Enter the name/label for the CO line (Use the dial pad keys and reference the lettering scheme tables).
• For additional information, see “Appendix E - Setting Up Letter Type for Using Special Characters” .
• Valid names can have up to 7 alphanumeric characters.
• The default is LINE 1 through LINE 40, corresponding to directory numbers 800 through 839.
8) Press save when you have finished the label to save the new name/label name.
9) Press next to enter another CO line directory name.
When finished programming CO line name/labels:
10) Press the Volume button (up or down) to return to the DB Item Select screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Page view 66
1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 503 504

Comments to this Manuals

No comments