Vertical Edge 120 Instruction Manual Page 227

  • Download
  • Add to my manuals
  • Print
  • Page
    / 504
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 226
- 219 -
DX-120 Programming Manual BASIC CALL HANDLING PROGRAMMING TASKS
Setting Up Hold Recall via PC-DBA (continued)
When you are finished:
3) Click the Update button to store the settings into the database on the local disk.
4) Click the Close button to exit the current screen and return to the PC-DBA main screen.
When you have finished all programming changes:
5) Perform a SEND to copy the database changes to the DX-120 switch system memory.
SETTING UP HOLD RECALL VIA THE DET
NOTE
chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen.
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see page 27).
3) Press show to display the DB Item Select screen.
Programming an SLT Hold Recall:
From the DB Item Select screen (see steps 1 through 3 above):
4) Enter 03-12.
5) Press save to advance to SLT Hold Recall programming.
6) Press chg to select the length of time you want the system to allow a call to remain on hold until it recalls
it to the SLT extension user’s phone.
• Valid choices range from 0 to 5.0 minutes.
• The default is 1.0.
7) Press next to display the EKT Hold Recall screen (now go to step 6 in “Programming an EKT Hold
Recall:” below).
OR
Press the Volume button (up or down) to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Setting Up Hold Recall via the DET (continued on next page)
Page view 226
1 2 ... 222 223 224 225 226 227 228 229 230 231 232 ... 503 504

Comments to this Manuals

No comments