BASIC SYSTEM PROGRAMMING TASKS DX-120 Programming Manual
- 110 -
Customizing the Numbering Plan via PC-DBA (continued)
CUSTOMIZING THE NUMBERING PLAN VIA THE DET
You can program the numbering plan for extensions as well as for CO groups.
NOTE
• chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
• You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen.
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see page 27).
3) Press show to display the DB Item Select screen.
NUMBERING PLAN (PART 1): EXTENSION SETTINGS
Setting the directory number:
From the DB Item Select screen (see steps 1-3 above):
4) Enter 08-09-02.
5) Press save to enter directory number programming.
6) Press show to display the length setting (go to step 5 in the next section).
OR
Press the Volume button (up or down) to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Setting the length of the extension group number:
Use the steps below to select the number of digits (1 to 4) you want to use in extension numbers
From the DB Item Select screen (see steps 1-3 above):
4) Enter 08-09-02-01.
5) Press save to display the length of the number you want to use in extension numbers.
• The default is 3
6) Press chg until the length you want to use appears.
7) Press save to store the setting.
8) Press next to display the Leading 1 setting (go to step 5 in the next section).
OR
Press the Volume button (up or down) to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Customizing the Numbering Plan via the DET (continued on next page)
Comments to this Manuals