Outgoing Call Access 1-152
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
1. Press [TRANS/PGM], then a Flex button.
2. Press [TRANS/PGM], then ??.
3. Press [HOLD/SAVE] to store the setting.
Call Time Restriction
The Call Time Restriction feature is used to restrict the call time of outgoing CO calls. A User
can set the Call Cut Off timer so that the call will automatically be disconnected when the set
time expires.
CONDITIONS
• All parties on a time restricted call hear a warning tone 15 seconds before the call is
disconnected.
• This feature can be assigned on a station-by-station basis.
• Time restrictions can be applied to outgoing CO calls only.
• When the Call Time Restriction is set for a particular station, that time remains in effect:
- for calls on hold, as well as any calls that station transfers to any other station in the
system.
- even if the station participates in a conference that includes an outgoing CO line.
ADMIN PROGRAMMING
Set CO Call Time Restriction
Set Call Cut-Off Timer
CO Call Time Restriction -- if flag is set to ON, an outgoing CO
call may be disconnected when Call Cut -Off Timer (PGM 113 -
FLEX 12) expires.
PGM 112 + FLEX 3 + 0
(Off) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Call Cut Off Timer -- outgoing CO call time is restricted with
this timer. A call is released automatically after this time. If
this timer is set to 0, a call is not released automatically.
PGM 113 + FLEX 12 + 00
(Value) + [HOLD/SAVE]
VALUES --
00-99 (mins)
Comments to this Manuals