Vertical SBX IP 320 Service Manual Page 245

  • Download
  • Add to my manuals
  • Print
  • Page
    / 452
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 244
Other Programming Tables 1-231
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
Pulse Dial Ratio (PGM 176)
SMDR Attributes (PGM 177)
PC Admin -- PC Admin can be connected through this
port.
PGM 175 + FLEX 9 + Auto
Select + [HOLD/SAVE]
VALUES --
port number
PC Attendant -- PC Admin can be connected through this
port.
PGM 175 + FLEX 10 + 08
(Value) + [HOLD/SAVE]
VALUES --
Range = 01-11
CTI -- CTI can be connected through this port. PGM 175 + FLEX 11 + 09
(Value) + [HOLD/SAVE]
VALUES --
Range = 01-11
Remote Diagnostic -- N/A
Remote Diagnostic data can be printed through this port.
PGM 175 + FLEX 12 VALUES --
port number
Pulse Dial Ratio -- Pulse dial speed ratio is set only
for 10 PPS.
PGM 176 + FLEX 1 + 1
(Value) + [HOLD/SAVE]
VALUES --
0 = 10 PPS 60/40%
1 = 10 PPS 66/33%
SMDR Long Distance Call Digit Counter --
outgoing calls are measured to see if the digit
counters are exceeded. If so, the call is
considered a long distance call.
PGM 177 + FLEX 4 + 07
Value + [HOLD/SAVE]
VALUES --
FLEX 4 or FLEX 14
Range = 07-15
Print Incoming Call -- if value is set to ON, all
incoming calls can be printed.
PGM 177 + FLEX 5 + 0 (Off)
+ [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Print Lost Call -- if value is set to ON, lost calls
are printed. Lost calls are defined as calls that
are unanswered.
PGM 177 + FLEX 6 + 0 (Off)
+ [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Records in Detail -- if value is set to ON, not only
total calls, total metering count, and total cost for
individual station, but also the detailed call
records are saved up to a maximum of 5000. If
value is set to OFF, only total calls, metering
count, and cost for individual station information
will be recorded.
PGM 177 + FLEX 7 + 1 (On)
+ [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Release 3.5
June 2010
Page view 244
1 2 ... 240 241 242 243 244 245 246 247 248 249 250 ... 451 452

Comments to this Manuals

No comments