Call Control 1-18
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
OPERATION / SETUP
To select the music source from an Attendant Station:
1. Press [TRANS/PGM], then press 075.
2. Enter the music source/channel (00-12):
Channel 00: No music
Channel 01: Internal music
Channel 02: External music
Channel 03: VMIB BGM
Channel 04-08: SLT MOH
NOTE: As it is selected, the music source will be heard. However, if the music channel
has no music source, no music will be heard.
3. Press [HOLD/SAVE] to store the setting.
Station Feature Cancel
The Attendants can cancel features such as DND, Call Forward and pre-selected messages at
other stations.
OPERATION / SETUP
To disable active features for a station from an Attendant Station:
1. Press [TRANS/PGM], press 071.
2. Enter the appropriate station range.
3. Press [HOLD/SAVE] to store the setting.
Call Control
Account Code
Account codes are used to identify outgoing (external) calls for accounting and billing purposes.
A separate account code can be assigned to each station (up to 12 digits: 0 to 11) so that a
company can identify and bill (where applicable) calls made from each station.
IMPORTANT: An ACCOUNT CODE flex button must be programmed before certain aspects of
this operation can be performed (see below).
Comments to this Manuals