Remote IP Phone Setup E-52
Appendix E: Quick Start Topics
SBX IP 320 Programming & Operations Guide
PREPARATION
1. Before starting, verify that your VOIP card is installed into the system properly and
that the card is recognized in the KSU database.
2. KSU DIP switches must be set to enable the system to retain programming changes.
3. Set your PC IP address, default gateway, and subnet mask as shown in the table on
the previous page.
4. Set the KSU’s IP addressing using PGM 108 when logged into KSU administration
from the 24-button digital attendant station (station 100 by default). This assigns the IP
address to the KSU’s LAN port. The configuration for the VOIP card begins here.
Configuring the VoIP Card Using PCAdmin
1. Double-click Pre-programmed > Configuration
2. Right-click on the VoIB and select Logical Assignment.
Comments to this Manuals