Vertical SBX IP 320 Service Manual download pdf (Page 34)

Call Control 1-20

Chapter 1: Basic System Features

SBX IP Programming & Operations Guide

Authorization Code

Authorization codes can be assigned to stations to give the users the ability to make calls on

restricted phone lines (overriding access restrictions). When a station is programmed to require

an Authorization Code, the assigned code must be entered in order to access a CO line.

CONDITIONS

• To prevent restricted, unauthorized phone calls from being made, personal authorization

codes should be kept secure by the System Attendant and individual station users.

• An authorization code must contain 3 to 11 digits.

• Each station must have a different authorization code. An authorization code cannot be

assigned to more than one station.

• Up to 200 authorization codes can be programmed on the system.

• If Loop LCR ACNT is set on a station, the authorization code is required each time the

station dials the Loop LCR CO Access code.

• An authorization code can be used for SMDR, DISA account codes.

• A long beep after a number is dialed indicates the need to enter an authorization code.

• Authorization codes are also used for mailbox passwords. Remote access of a mailbox

requires that a authorization code be programmed.

ADMIN PROGRAMMING

Access Authorization Code Table

Authorization code table entries consist of each station password and extra account

codes. The table entry from 001 to the maximum capacity of station numbers are saved

along with the password of each station. CO Line Groups can be marked to deny access

until a matched authorization code is entered. In this case, a DND warning tone is

provided when the CO Line Group access code is dialed.

There can be no duplicate entries. By default, Authorization Codes are not assigned. In an

SBX IP system, the total number of Authorization Codes is 200 entries.

Authorization code length can be programmed as 5 digits or variable length (3-11digits). If

5-digit authorization code usage is programmed, the authorization code works as 5-digit

length in admin program or features.

Release 3.5

June 2010

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 451 452

No comments

Vertical SBX IP 320 Service Manual Page 34